Honeywell HDVR Reference Manual Download Page 71

Page: 71 / 238

HRDV Reference Guide

Rev 1.00

Document 900.0261

04/05

To add a new drive:

Power down the HRDV unit and install the new drive. Refer to the

HRDV16/8 Internal

Drive Upgrade Guide

for complete details. This document can be found on the

Honeywell web site at

www.honeywellvideo.com

Power up the HRDV unit and go to the Add Disk screen (

MENU

➤

System Setup

➤

System Utilities

➤

Add Disk

Enable only the new drive you have added and set the desired Event percentage.

Accept

your changes to exit this screen. The new drive is now operational.

Exit Menu mode and ensure recording is enabled.

Data Recovery

Use this screen when you want the system to attempt to restore the file system to its original
state (for example, due to an inadvertent Format All, Format Timelapse, or Format Event
command).

You can also use this utility to attempt to recover disk drive data (timelapse video, event
video, text data) if a system problem occurs.

Figure 10-4

Data Recovery Screen

Summary of Contents for HDVR















































































































































































































































Search results

Summary of Contents for HDVR

Reviews:

Brands by name

Popular brands

Honeywell HDVR, Reference Manual

Search results

Summary of Contents for HDVR

Reviews:

Brands by name

Popular brands