manualshive.com logo in svg

Honeywell HDVR, Reference Manual

Share
Download
Honeywell HDVR Reference Manual Download Page 126

Rev 1.00

108

Document 900.0261

04/05

Video Playback and Searching

4.

Press 

Play

 to start the search. You see the message 

REVIEW CLIPS. Please wait while we scan the disk

…, 

then the Review Clips screen displays with a list of clips. The number of event clips 
and timelapse clips that were found shows at the bottom of the screen.

Autobreak

To make searching for timelapse clips easier, the HRDV16/8 has an Autobreak option that 
automatically stores timelapse recording into individually searchable chunks of video. You 
can set the Autobreak option to hourly, daily, 15 minutes, or no autobreak (one continuous 
single clip). For more information, see 

Chapter 9, User Preferences

.

A setting of 

Daily

 creates a single daily timelapse clip for each day starting at 12:00 

midnight. This allows you to do a simple search for incidences based on a particular day. 
Instead of jump searching multiple 15-minute portions of hourly clips (as with the Hourly 
setting) a user can scan through a single day clip using turbo mode on the jog wheel. When 
viewing an incident, a reviewer can slow down and view the incident as required.

We recommend a setting of 

Hourly

 for systems doing timelapse recording.

If Autobreak is disabled, the timelapse clips are continuous files that could record for an 
entire day or even a whole week as one timelapse clip.

Text

Search for video clips labeled Text event on Ports 1 to 4.

Time search

When selected, the HRDV only uses the time entered in the Begin field. The End 
field will be disabled (

✘

) and not used. When you select 

Play

, the HRDV locates a 

video clip and plays from the Begin time. The video clip does not have to start at 
this time; the HRDV only needs to find a clip with this time in it.

Time-lapse

Search for video clips labeled Time-lapse.

Check archive drive

Search only the archive drive.

Toggle all events

Toggle all alarm, motion and text events on and off.

Field (Cont’d)

Description

Summary of Contents for HDVR















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands