manualshive.com logo in svg

Honeywell HDVR, Reference Manual

Share
Download
Honeywell HDVR Reference Manual Download Page 186

Rev 1.00

168

Document 900.0261

04/05

E-Mail Alert Program Installation

After you run the setup program and install the E-Mail Alert application, this application will 
be added into the PC Start Menu. The next time the PC restarts, it will automatically start the 
E-Mail Alert program. The user will see the E-Mail Alert splash screen for a couple of 
seconds and then the program will minimize to the Windows status bar area located on the 
lower-right corner.

The setup program can be found on the CD that came with the HRDV16/8 unit in the E-Mail 
Alert 1.0 folder. You can also find the setup program on the Honeywell web site at 
www.honeywellvideo.com.

To install the E-Mail Alert program:

1.

Insert your RAS CD into a Windows based PC that has a CD-ROM drive.

2.

When the RAS auto install window displays, click 

Cancel

, and then 

Finish

 to exit.

3.

Using Windows Explorer, navigate to the E-Mail Alert folder, and then click 

Setup.exe

.

4.

Follow the prompts as required.

To configure the E-Mail Alert program:

1.

Maximize the E-Mail Alert program by double-clicking the minimized E-Mail Alert icon 
in the Windows status bar area

or double-click the Desktop E-Mail Alert icon.

The following screen displays.

Summary of Contents for HDVR















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands