manualshive.com logo in svg

Honeywell HDVR, Reference Manual

The Honeywell HDVR Reference Manual is a comprehensive user guide for the HDVR product line, providing detailed instructions on set-up, operation, and troubleshooting. Easily download this manual for free from our website, ensuring you have all the necessary information to optimize your HDVR experience.

Share
Download
background image

HRDV Reference Guide

Rev 1.00

185

Document 900.0261

04/05

Software Update

The HRDV16/8 can be updated by inserting the proper CD into the CD-ROM drive on your 
HRDV and also comes with two software applications that allow you to update software 
using a PC with your HRDV16/8:

•

Software Update Utility (SUU) for updating firmware. The SUU requires little setup, but 
it can only perform this one function.

•

Remote Access Software (RAS) for updating software. RAS is a more versatile 
application. To use it you must first set up a communication device on your Windows 
operating system. For detailed instructions on downloading software using RAS, refer 
to the 

HRDV RAS User Guide

.

The SUU is a Windows-based application that writes the data to the HRDV16/8 memory via 
an RS232 connection and updates the flash in a one-load operation. To use the SUU you 
must connect your HRDV16/8 to a local PC using a null modem cable. 

Note

The HRDV16/8 does not record digital video while you are downloading 
software.

Caution

Powering down during the flash update requires a service card to 
restore the unit to operational state. It may also require a service call.

Downloading Software Using the CD-ROM Drive

1.

Download the HRDV16/8 Firmware to your PC. Find the most current firmware at the 
Honeywell web site at: 

http://www.honeywellvideo.com/support/downloads/downloads_dvr.html

2.

Unzip the downloaded HRDV16/8 firmware file (for example, 

HRDV16_firmware_120g.zip

). This extracts a file (

16il_20g.bin

) for burning before 

downloading to the HRDV.

3.

Insert a blank CD into your PC’s CD-ROM drive. Burn the firmware file (for example, 
16il_20g.bin) using a CD writing program such as Roxio Easy CD Creator

®

 5 (see the 

documentation included with the CD writing program for more information). The 
contents of the CD should appear similar to 

Figure C-3

.

Summary of Contents for HDVR















































































































































































































































Reviews:

No comments

Related manuals for HDVR

IOT-Smart Solutions MDAH4804 Installation Manual preview
MDAH4804
Brand: IOT-Smart Solutions Pages: 13
Clover CDR-4770 Instruction Manual preview
CDR-4770
Brand: Clover Pages: 90
Aiwa Microplate Reader Service Manual preview
Microplate Reader
Brand: Aiwa Pages: 71
Lemona CL-658DV User Manual preview
CL-658DV
Brand: Lemona Pages: 8
X-Core XVR264_04C User Manual preview
XVR264_04C
Brand: X-Core Pages: 110
Sight mark CVR640 Instructions Manual preview
CVR640
Brand: Sight mark Pages: 12
ELRO EL430DVR Installation & Operating Manual preview
EL430DVR
Brand: ELRO Pages: 73
Q-See QH25DVR4C Quick Installation Manual preview
QH25DVR4C
Brand: Q-See Pages: 5
Pinetron AHD1K series User Manual preview
AHD1K series
Brand: Pinetron Pages: 87
Optiview VR EM Quick Start Up Manual preview
VR EM
Brand: Optiview Pages: 27
Optiview HDVR161080-Q4 User Manual preview
HDVR161080-Q4
Brand: Optiview Pages: 342
UNIMO Technology UDR-9404 User Manual preview
UDR-9404
Brand: UNIMO Technology Pages: 15
Advanced Technology Video ED2808 User Manual preview
ED2808
Brand: Advanced Technology Video Pages: 95
CBC GANZ Digimaster Series Instruction Manual preview
GANZ Digimaster Series
Brand: CBC Pages: 78
Zetronix zKChain-HDL User Manual preview
zKChain-HDL
Brand: Zetronix Pages: 6
Streamax X7 PRO-H0804 User Manual preview
X7 PRO-H0804
Brand: Streamax Pages: 11
Axis M7010 User Manual preview
M7010
Brand: Axis Pages: 52
Speed Concepts HD-3G User Manual preview
HD-3G
Brand: Speed Concepts Pages: 12

Brands by name

Popular brands

Load more brands