manualshive.com logo in svg

Honeywell HDVR, Reference Manual

Share
Download
Honeywell HDVR Reference Manual Download Page 122

Rev 1.00

104

Document 900.0261

04/05

Video Playback and Searching

Playing Back Recorded Clips

To play back recorded video clips, press 

PLAY

 ( ) on the HRDV16/8 front panel. The Go 

To Search screen displays in the lower half of the screen while the last viewed video clip is 
paused and displays in the background.

Note

If 

Timelapse

 is selected and a 

Go To

 performed, you can play back 

video like one big VCR tape without having to jump from clip to clip. 

If 

Event

 is selected and a 

Go To

 performed, you may only be able to 

play back video from within a single, short video clip.

Select 

Play Last Recorded Clip

 and press 

Enter

 to start viewing the last recorded clip.

Or specify the desired time frame for the clip you wish to play back, select 

Go To

 and press 

Enter

.

Note

The 

Play Last Recorded Clip

 feature assumes user preferences/clip order is 

set to reverse chronological order. This feature plays back the first clip in the 
review clips list. The clip can be the most current event or it could be the last 
timelapse clips started up to 15 minutes ago, or if Autobreak is disabled the 
timelapse clip could have started a week ago. 

If not in reverse order, pressing 

PLAY

 plays back the oldest clip available.

See 

Searching for Video Clips with the Go To Search Screen 

on page 

105

 for information 

on the Go To search screen.

Initially, clips play back at normal forward speed (real-time speed). You may play back the 
video images in forward or reverse, and at speeds varying from freeze frame to real time 
(NTSC—up to 60 fps for HRDV16, 30 fps for HRDV8; PAL—up to 50 fps for HRDV16, 25 

Summary of Contents for HDVR















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands