Honeywell HDVR, Reference Manual

Page: 82 / 238

Rev 1.00 64 Document 900.0261
04/05
Timelapse Recording Setup
Figure 12-2 Timelapse in Simple Mode
b. Enter the desired recording schedule, then select Accept .
c. Repeat for all the days of the week and all the cameras, as required.
Field Description
Start Set the start time range you want to set or clear for recording from the displayed
camera(s) and day’s screen.
Stop Set the stop time range you want to set or clear for recording from the displayed
camera(s) and day’s screen.
Camera Select individual or all connected cameras to which the recording schedule will be
applied. Options are:
1 to 16 , ALL (default)
Set Apply the start and stop time parameters you have selected to the displayed
camera(s) and day for recording. Selecting
Set displays the times as green.
Clear Remove the start and stop time parameters you have entered from the selected
day. Selecting
Clear displays the times as red.
Copy Copy the current day’s display to all days. If you plan to record the same time for
every day of the year, this is the fastest way to do this. Note that when you view
other days’ record time, all will show the same recording schedule.
Green areas indicate enabled recording
times.
8:00 a.m. to 5:00 p.m. Normal timelapse record
Event recording only during alternate hours
24 hour, motion activated timelapse record