Honeywell Dolphin 9900, User Manual, Page: 62 / 170

3 - 8 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
GSM Section
If there is no GSM radio installed in the terminal, disable this section.
Key Description Default
Value Available Value
Enable Enables and disables the GSM radio. 0 0=Disable
1=Enable; when enabled, the
WLAN radio turns off
automatically.
APN Enter the Access Point Name (APN) for
the GPRS network. Empty APN value
IPAddress Enter the IP Address. Empty Empty=GSM uses DHCP (server-
assigned IP address)
X=IP address
Protocol Enter the protocol to use. IP Protocol type
Username Enter the username for the GPRS
connection. Variable Empty=Disabled
0=Disabled
X=The username for the GPRS
connection.
Password Enter the password associated with the
username for the GPRS connection.
Note: This key is encrypted; see
Encrypted on page 2-14.
Variable Empty=Disabled
0=Disabled
X=The password for the GPRS
connection.
ActiveSync Section
The ActiveSync Section configures the terminal’s ActiveSync connection parameters.
Key Description Default
Value Available Values
AutoConnect Enables and disables the ActiveSync
connection when the terminal first
connects to the communication
peripheral. 1 0=Disable ActiveSync connection
1=Enable ActiveSync connection
Connection Specifies the connection type and baud
rate. ‘USB
Connection `USB Connection
`115200 Default
`19200 Default
`38400 Default
`57600 Default
Note: These values must be typed
in exactly as they appear
here.