manualshive.com logo in svg

Honeywell Dolphin 9900, User Manual, Page: 28 / 170

Share
Download
Honeywell Dolphin 9900 User Manual Download Page 28

2 - 12

Rev A

8/6/08

 Dolphin® Power Tools User’s Guide

Working with Keys

Keys have a Name, a Description, and a Value and reside inside sections. For specific key values, consult 
the chapters of this user’s guide that describe the EXM file you’re attempting to edit. 

Edit Menu Options

Select a key and right-click or click Edit to see the available options.

Menu Item 

Description

Rename

Activates the key name so that you can rename the key. Rename is disabled if the key 
is locked or disabled; see 

Key Types

 (page 

2-14

). 

Cut

Cuts a selected key.

Copy

Copies a selected key.

Paste

Disabled; keys can be pasted only as children of a section.

Paste as Child

Pastes the key just cut or copied in the selected section. Keys are not multi-level; all 
keys paste at the same level within a section.
You can cut, copy and paste keys within an EXM file or across EXM files. 

Delete

Deletes a selected key. 
You cannot undo a delete; you might want to consider disabling rather than deleting.

Enable

Enables keys that were disabled. When a key is enabled, the client application can 
read and apply its value. When you enable a key, make sure to specify a value for that 
key; do not leave it blank.

To enable a key, its parent section must be enabled.

The same options 
appear on both 
menus.

Summary of Contents for Dolphin 9900











































































































































































Reviews:

No comments