manualshive.com logo in svg

Honeywell Dolphin 9900, User Manual, Page: 166 / 170

Share
Download
Honeywell Dolphin 9900 User Manual Download Page 166

12 - 2

Rev A

8/6/08

 Dolphin® Power Tools User’s Guide

BTPrint

BTPrint allows you to print to a Bluetooth printer via the command line, provided that the Bluetooth printer 
is set up as a Bluetooth Favorite on the Dolphin terminal. 

For more information about setting up Bluetooth Favorite devices, please see the Bluetooth section of the 
Print Demo chapter in the Demos User’s Guide, which is available on the User CD or from the Partners 
area of 

www.honeywell.com/aidc

.

Calling a Bluetooth Printer

Call BTPrint.exe from the command line 

\Program Files\Power Tools\BTPrint.exe

 – with the 

path of the document as the command line argument.

IrDAPrintCE

IrDAPrintCE allows you to print to an IrDA printer via the command line.

Calling an IrDA Printer

Call the IrDAPrintCE.exe from the command line 

\Program Files\Power 

Tools\IrDAPrintCE.exe 

with the path of the document as the command line argument.

Summary of Contents for Dolphin 9900











































































































































































Reviews:

No comments