Honeywell Dolphin 9900, User Manual

Page: 58 / 170

3 - 4 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Security Section
The Security section has no keys and one child section named “Supplicant,” which contains several
profile subsections.
Supplicant Section
The Supplicant section consists of a number of child sections. The default child section is named Profile1
and contains all the keys necessary to create a configuration profile for the WLAN radio.
To create multiple radio configurations, copy the Profile1 section and paste it at the root level of the
Supplicant section. Then, rename that profile and configure the keys according the desired network
configuration. Each child section name is arbitrary, but each name must be different.
The Supplicant section contains one key named ActiveProfile. Type in the Value equal to name of one
of the desired profile child sections.
When DeviceConfig is activated on the terminal, the terminal will apply the settings in the profile specified
in the ActiveProfile key. If the ActiveProfile key does not have a matching profile, the radio will be enabled
by DeviceConfig but no specific radio configuration will be activated, which means that the radio will not
connect to your network.
Profile Subsections
Each Profile subsection contains the keys that configure the radio connection from the terminal to the
network.
Key Description Default
Value Available Values
SSID The service set identifier used to connect to
network; usually the network name of the
access point or peer station. N/A X=Your network’s SSID
Any=Connect to any network
Assoc. Mode The general association mode (sometimes
called “authentication”) of the radio. N/A
• None (no authentication or
encryption)
• WEP
• IEEE 802.1X
• WPA-Personal (PSK)
• WPA-Enterprise (EAP)
• WPA(2)-Personal (PSK)
• WPA(2)-Enterprise (EAP)
Encryption The encryption mode available for the
association mode. N/A Open & Shared (WEP)
TKIP, AES-CCMP, TKIP &
CCMP (WPA)