Honeywell A700, Hardware Reference Manual

Page: 91 / 334

[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Decoding Security]
Registry Key
Default
Value
A730 A730x Description
CenterDecoding 0x0
ü ü
Only decodes a bar code if it is in the
center of the frame.
CenterDecodingTolerance 0x0
ü ü
Amount of tolerance for what is
considered the "center". Range is 0x0 -
0x64 (0 to 100), where "0x0" is the
least tolerant (must be aimed exactly).
Imager
Imager configuration
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Imager]
Registry Key
Default
Value
A730 A730x Description
DecodeMode 0x1
ü ü
Decoding mode, where
0 = linear imager emulation, and
1 = 2D imager.
AimerFlashing 0x1
ü ü
Aimer mode, where
0 = on,
1 = decode optimized (flashing at
frame rate), and
2 = off.
69 Voice Device and Headset Hardware Reference Guide