Honeywell A700, Hardware Reference Manual, Page: 101 / 334

use—especially if the mountings have not been firmly secured or if workers attempt to adjust the
mounting manually.
To prevent this issue, remove the user-adjustable handle on the arm and install a 1/4" #20 nylon
lock nut provided with the Vocollect VMT kit. The lock nut cannot be loosened by hand and
resists most vibrations.
Secure VMT cabling
The cables and wiring that connect the Talkman VMT must be well secured to the vehicle so that
they do not get caught on anything. Snagged cables could result in an accident and damage to
the VMT or vehicle.
CAUTION
Separate the cabling from other wiring in the vehicle and ensure that it is routed away from
sharp edges.
Select A700/A700x VMT Mounting Option
The Talkman A700/A700x VMT is designed to be installed using RAM® Mounting Systems
hardware. Honeywell supplies a mounting bracket for the device and mounting hardware from
RAM Mounting Systems. Additional hardware mounting bracket options can be purchased
directly from RAM Mounting Systems (www.ram-mount.com) to customize the installation.
IMPORTANT
The A700/A700x VMT must be mounted to a sturdy surface.
Screw-on Mount
The Screw-on mount is bolted to a stationary surface on a vehicle using the following parts.
Screw-on mounting parts
IMPORTANT
Use only the four supplied screws to attach the Ram ball to the dock. See "Install_Dock".
79 Voice Device and Headset Hardware Reference Guide