Honeywell A700, Hardware Reference Manual, Page: 76 / 334

Registry Key
Default
Value
A730 A730x Description
UPC-ATransmittedasEAN-13 0x1
ü ü
Enables conversion of UPC-A to EAN-
13.
UPC-ETransmittedasUPC-A 0x0
ü ü
Enables conversion of UPC-E to UPC-A.
EAN-8TransmittedasEAN-13 0x0
ü
X
Enables conversion of EAN-8 to EAN-
13.
EANUPCAdd-OnDigits 0x0
ü ü
Add-on digit requirement, where 0 =
optional and 1 = required.
EANUPCGTINProcessing 0x0
ü
X
Converts EAN-13 bar codes to GTIN
(Global Trade Item Number)-compliant
format.
ISMNConversionforEAN-13 0x0
ü
X
Converts EAN-13 bar codes starting
with "9790" to ISMN (International
Standard Music Numbering) format.
ISSNConversionforEAN-13 0x0
ü
X
Converts EAN-13 bar codes starting
with "977" to ISSN (International
Standard Serial Number) format.
UPC-AUDSI A0
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
UPC-EUDSI E0
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
EAN-8UDSI FF
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
EAN-13UDSI F
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
PDF417
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\PDF417]
Voice Device and Headset Hardware Reference Guide 54