Home
/
Honeywell
/
A700
/
Hardware Reference Manual

Honeywell A700, Hardware Reference Manual, Page: 168 / 334

Share

Page: 168 / 334

Honeywell A700 Hardware Reference Manual Download Page 168

4. Insert the supplied screws (3) through the holes in clip assembly part 1 and into part 2.
5. Tighten the screws with 3.0 in-lbs (0.34 Nm) torque so that there is no gap between parts 1

and 2.

6. Using the plunger, attach the cord to the cord clip.

Replacing the Ear Pad on the SR-15 Headset

1. With headset removed and disconnected, rotate the headband away from the

microphone/speaker assembly.

l

If the cable is clipped to the center of the back of the headset, either unclip it or allow
enough slack to be able to move the headband away from the microphone/speaker
assembly.

2. Remove the worn foam cover from the speaker assembly.
3. Place the new foam cover over one of the three mounting ribs.
4. Gently pull the foam over the other two mounting ribs.
5. Rotate the microphone/speaker assembly back towards the headband.

You will hear a click when it is in place.

SR-20-Series Vocollect Lightweight Headset

Voice Device and Headset Hardware Reference Guide

146

«
...
166
167
168
169
170
...
»

Summary of Contents for A700















































































































































































































































































































































Reviews:

No comments