Honeywell A700, Hardware Reference Manual, Page: 59 / 334

Registry Key
Default
Value
A730 A730x Description
JapanPostCheckDigitTransmission 0x1
ü
X Enable transmission of the check digit.
JapanPostUDSI P5
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
Dutch Post
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Dutch Post]
Registry Key
Default
Value
A730 A730x Description
DutchPostActivation 0x0
ü ü
Enables the Dutch Post symbology.
DutchPostCodeMark 0x2a
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
DutchPostUDSI P4
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
Sweden Post
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
37 Voice Device and Headset Hardware Reference Guide