Honeywell A700, Hardware Reference Manual, Page: 186 / 334

3. Attach the charger to the DIN rail by hanging the two hooks on the back of the unit on the
top lip of the rail.
4. Slide the charger horizontally to the desired position on the rail, and rotate the locking
arms into the locked position - flush with both sides of the unit.
5. If the charger does not feel secure on the rail, adjust the rubber stops on the back of the
unit by screwing them out toward the wall.
6. Plug the power supply into a power source and check the LED indicator at the bottom right
of the charger face. If the indicator light is a solid green, the charger is powered on.
SRX2/SRX3 Headset Battery Charger
The SRX2/SRX3 20-bay or 6-bay battery charger can be used with SRX2 or SRX3 batteries.
l
The SRX2/SRX3 battery charger has two models, a 20-Bay charger to charge up to 20
batteries at one time, and a 6-Bay charger to charge up to 6 batteries at one time.
l
The LED indicator light on the charger front panel indicates if the charger is powered on or
not.
l
Each battery port has LED lights that indicate battery charge status and battery health.
l
SRX2/SRX3 headset battery chargers are designed to be placed on a desktop or mounted
on a wall using a DIN rail. Customer with multiple chargers must allow the required space
between wall mounted units and must avoid stacking desktop units on top of each other.
SRX2/SRX3 Headset Battery Charger Specifications
20-Bay Charger 6-Bay Charger
Weight
8 lbs (3.63 kg) with 20 batteries
6.38 lbs. (2.89 kg.) without batteries
2.5 lbs. (1.14 kg) with 6 batteries
2.1 lbs. (0.96 kg.) without batteries
Width Approximately 55 cm (21.65 in.) Approximately 26.67 cm (10.5 in.)
Depth Approximately 15.8 cm (6.22 in.) Approximately 11.43 cm (4.5 in.)
Voice Device and Headset Hardware Reference Guide 164