Home
/
Honeywell
/
A700
/
Hardware Reference Manual

Honeywell A700, Hardware Reference Manual, Page: 218 / 334

Share

Page: 218 / 334

Honeywell A700 Hardware Reference Manual Download Page 218

NOTE
The QTERM-G55 has reached end-of-life. Honeywell recommends the Dolphin CT60 for
training with the A700/A700x.

Honeywell Dolphin CT60

The Honeywell Dolphin CT60 is an Android™-based hand-held computer that can be used as a
training device. For CT60 configuration information refer to the product documentation

To use the CT60 as a training device:

1. Configure the CT60 to connect to your network.
2. Open the Chrome™ browser on the CT60.
3. Enter the IP address of the Voice device in the browser address bar on the CT60.
4. Tap on the Train Words icon.

The display can be used in either portrait or landscape mode.

Additional Peripheral Connection Information

Understanding Device Connections

This section provides an overview of the device ports available on Honeywell voice devices.

Device Ports

Honeywell systems can accommodate wired devices as well as wireless devices using Bluetooth®
Wireless Technology. Bluetooth is integral with the Talkman A700/A700x Series. It supports
scanning, printing, and wireless headset use simultaneously.

Voice Device and Headset Hardware Reference Guide

196

«
...
216
217
218
219
220
...
»

Summary of Contents for A700















































































































































































































































































































































Reviews:

No comments