Honeywell A700, Hardware Reference Manual, Page: 171 / 334

2. Hold the headset by the yoke in one hand. With the other hand rotate the earpiece counter-
clockwise 10 degrees.
3. Disengage the earpiece section from the headset.
4. Remove the worn foam cover.
5. With the black O-ring gasket facing out, place a new ear pad over the ear pad mounting
disk.
If the ear pad mounting disk does not have a black O-ring gasket attached to it,
performance may be affected. You must replace the entire ear pad mounting disk, which
includes the black O-ring gasket.
6. Line up the keys on the earpiece to the headset, connect the mounting disk.
7. Rotate the earpiece clockwise 10 degrees to secure it. Note that the earpiece will not
engage with the headset if it is backwards.
SR-30 Vocollect High-Noise Headset
The SR-31 Headset is a universal version designed to be used with handheld devices.
SR-30 Headset Specifications
Specification Details
Weight
7.7 oz (218 g) with cable
6.2 oz (175 g) without cable
Operating temperature -40 °F to 122 °F (-40 °C to 50 °C)
149 Voice Device and Headset Hardware Reference Guide