Honeywell A700, Hardware Reference Manual, Page: 82 / 334

NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\QR Code]
Registry Key
Default
Value
A730 A730x Description
QRCodeActivation 0x0
ü ü
Enables the QR (Quick Response) Code
symbology.
QRCodeInverseVideo 0x0
ü
X
Decoding mode for black/white
inverted labels, where
0 = normal (black on white),
1 = inverse (white on black), and
2 = automatic.
QR
Code
UnconventionalStructuredAppend
0x0
ü
X
Enable transmission of label header
with every symbol.
MicroQRActivation 0x0
ü
X Enables the "micro" variant of QR.
QRCodeCodeMark 0x2a
ü ü
A single character inserted before the
barcode data to indicate the
symbology.
QRCodeUDSI D1
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
GS1 Composite
Support for the parameters in the table is labeled as follows:
ü
= Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
Matrix[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\GS1 Composite]
Voice Device and Headset Hardware Reference Guide 60