Honeywell A700, Hardware Reference Manual, Page: 110 / 334

Quantity Description
1 Vehicle Mount, Holder
1 Vehicle Mount, Holder/Base Screw On Attachment
1. Drill the holes required to secure the base to the vehicle. If using the clamp or claw mount,
skip this step.
Apply some lubricant (for example, light oil or anti-seize) to the threads of the clamp mount
screws.
2. Screw or clamp a base to the location.
3. Attach the other base to the other end of the arm and tighten once in the desired location
by turning the locking lever clockwise.
4. Screw the device holder to the base.
5. Insert a device into the holder.
To prevent vibration, the arm of the mounting bracket should not touch the stem of the ball
of the base. In other words, the arm should not be tilted so far as to have these pieces
touching.
Route the Electrical Cables
You will need the following equipment:
IMPORTANT
All components used in in the electrical connection to the vehicle must be UL Listed.
l
One fuse holder from Cooper Bussman. Honeywell recommends using a Cooper Bussmann
HFA series in line waterproof fuse.
Voice Device and Headset Hardware Reference Guide 88