Honeywell A700, Hardware Reference Manual, Page: 74 / 334

Registry Key
Default
Value
A730 A730x Description
Code11CodeMark 0x2a
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
Code11CheckDigitVerification 0x1
ü ü
Number of check digits to verify.
Range is 1 to 2.
Code11BarCodeLengthL1 0x4
ü ü
Length value L1. Range is 0x0 to 0xFF
(0 to 255).
Code11BarCodeLengthL2 0x0
ü ü
Length value L2. Range is 0x0 to 0xFF
(0 to 255).
Code11BarCodeLengthL3 0x0
ü ü
Length value L3. Range is 0x0 to 0xFF
(0 to 255).
Code11BarCodeLengthMode 0x0
ü ü
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths", – Not
supported on N6600
2 = "L1 is min, L2 is max length".
Code11CheckDigitTransmission 0x1
ü ü
Enable transmission of the check digit.
Code11UDSI C1
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
EAN / UPC
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\EAN / UPC]
Registry Key
Default
Value
A730 A730x Description
UPC-AActivation 0x1
ü ü
Enables the UPC-A symbology.
Voice Device and Headset Hardware Reference Guide 52