Home
/
Honeywell
/
A700
/
Hardware Reference Manual

Honeywell A700, Hardware Reference Manual, Page: 179 / 334

Share

Page: 179 / 334

Honeywell A700 Hardware Reference Manual Download Page 179

CAUTION
The scanner is designed for occasional use and should not be used more than six times per
hour. Other scanning devices more suited to hands-free and eyes-free scanning should be
used for optimum performance.

Using the Talkman Device Holster

The holster is designed for the A710x/A710 and A720x/A720 devices that will not be handled
frequently throughout a shift.

NOTE
Honeywell strongly recommends using a Honeywell holster for your device. Placing a device
in a pocket or other enclosed space can cause issues with WiFi performance.

1. Attach the holster to the belt.
2. Undo the Velcro strips.
3. Slide the device into the holster, with the buttons facing up.
4. Fasten the Velcro strips.

Inline Adapter Cables: Talkman and Handheld Devices

A device-specific inline adapter training cable, also referred to as a "Y" or splitter cable, must be
used with third-party handheld devices in order to connect both a Honeywell headset and
listening system to the device.

Inline adapter training cables must only be used with listening systems approved by Honeywell.

157

Voice Device and Headset Hardware Reference Guide

«
...
177
178
179
180
181
...
»

Summary of Contents for A700















































































































































































































































































































































Reviews:

No comments