Honeywell A700, Hardware Reference Manual, Page: 137 / 334

1. Insert the disk into the hard-hat clip from the top.
2. Slide the disk into the clip until it snaps into place.
To remove the headset, apply pressure to the tab at the top of the hard-hat clip to release the disk
from the clip. Then slide the disk up and out of the clip. It may be necessary to use a tool, such as
a flat-head screwdriver, to press the tab.
Wearing the SRX2/SRX3 Hard-Hat Headset
The SRX2/SRX3 Hard-Hat Headset fork and disk assembly has two lock positions that allow for
easy wearing, removing and storing the hard hat with the headset attached. The inner position
keeps the earcup snug to the ear; the outer position enables the headset to be swiveled in the clip
without causing wear to headset parts or to the hard hat.
1. Hold the hard hat firmly.
2. Push the headset earcup in toward the head area of the hat until it snaps into its inner
position.
115 Voice Device and Headset Hardware Reference Guide