Honeywell A700, Hardware Reference Manual, Page: 69 / 334

Registry Key
Default
Value
A730 A730x Description
Matrix2of5StartStop 0x0
ü
X
Enables special ChinaPost mode,
where a specific start/stop is required
and the checksum is transmitted.
Matrix2of5CodeMark 0x44
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
Matrix2of5BarCodeLengthL1 0x6
ü ü
Length value L1. Range is 0x0 to 0xFF
(0 to 255).
Matrix2of5BarCodeLengthL2 0x0
ü ü
Length value L2. Range is 0x0 to 0xFF
(0 to 255).
Matrix2of5BarCodeLengthL3 0x0
ü ü
Length value L3. Range is 0x0 to 0xFF
(0 to 255).
Matrix2of5BarCodeLengthMode 0x0
ü ü
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
supported on A730x,
2 = "L1 is min, L2 is max length".
Matrix2of5UDSI B4
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
MSI Code
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\MSI Code]
Registry Key
Default
Value
A730 A730x Description
MSIActivation 0x0
ü ü
Enables the MSI Code (Modified
Plessey) symbology.
47 Voice Device and Headset Hardware Reference Guide