Honeywell A700, Hardware Reference Manual, Page: 78 / 334

IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Codablock]
Registry Key
Default
Value
A730 A730x Description
CodablockAActivation 0x0
ü
X
Enables the Codablock A (Code 39-
based) symbology (if enabling this
symbology, it is recommended to
disable Code 39 to prevent conflict).
CodablockFActivation 0x0
ü ü
Enables the Codablock F (Code 128-
based) symbology (if enabling this
symbology, it is recommended to
disable Code 128 to prevent conflict).
CodablockACodeMark 0x2a
ü
X
A single character inserted before the
bar code data to indicate the
symbology.
CodablockFCodeMark 0x2a
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
CodablockAUDSI K0
ü
X
User-defined symbology identifier.
Range is 0-4 characters.
CodablockFUDSI K1
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
TLC 39
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\TLC 39]
Voice Device and Headset Hardware Reference Guide 56