manualshive.com logo in svg

HMS AnyBus-X AB7607, User Manual, Page: 78 / 128

Share
Download
HMS AnyBus-X AB7607 User Manual Download Page 78

File System 8-7

© 2005 HMS Industrial Networks 

AB7607 User manual

Configuration Files

‘ethcfg.cfg’

This file contains the network configuration and is read by the module at start up. 

The settings in this file are affected by SSI commands.

The components and format of the file is shown below:

[IP address]

IP address

10.10.12.212

[Subnet mask]

Subnet mask

255.255.255.0

[Gateway address]

Gateway address

0.0.0.0

[SMTP address]

SMTP address – This must be configured in 

0.0.0.0

order to send emails

[DHCP/BOOTP]

DHCP/BootP  ‘ON’-Enabled, ‘OFF’-Disabled

OFF

[Speed]

Speed   ‘Auto’ Autonegotiation will be used

Auto

’100’ Forces the module at 100mbits

‘10’ Forces the module at 10mbits

[Duplex]

Duplex   ‘Auto’ Autonegotiation will be used

Auto

’Full’ Forces the module to operate only at full duplex.

’Half’ Forces the module to operate only at half duplex.

Summary of Contents for AnyBus-X AB7607

































































































































Reviews:

No comments