Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 4 / 264

Chapter 3 Recorder & Memory Function 31
3.1 Overview of the Recorder & Memory Function 31
3.2 Operation Sequence (REC&MEM) 32
3.3 STATUS Settings (REC&MEM: STATUS Screen) 34
3.3.1 Setting the Function Mode 35
3.3.2 Setting the Time Axis Range 36
3.3.3 Setting the Recording Length 37
3.3.4 Display Function 38
3.3.5 Setting the Display Format 39
3.4 Setting the Additional Recording Function 40
3.5 Settings on the Waveform Display Screen
(REC&MEM) 41
3.6 Setting The Printer (Only When The 8994
PRINTER UNIT Is Installed) 43
3.6.1 Setting the Print Mode 43
3.6.2 Setting the Real-time Printing Function 44
3.7 Setting the Auto Save Function 45
3.8 Simultaneous Display of Recorder and Memory
Waveforms 47
3.9 Start and Stop Operation (REC&MEM) 48
Chapter 4 FFT Function 49
4.1 Overview of the FFT Function 49
4.2 Operation Sequence (FFT) 50
4.3 STATUS Settings (FFT) 52
4.3.1 Setting the Function Mode 53
4.3.2 Setting the FFT Channel Mode 53
4.3.3 Setting the Frequency Range 54
4.3.4 FFT Number of Points Setup 55
4.3.5 Setting the Window Function 56
4.3.6 Setting the Peak Function 57
4.3.7 Selecting Reference Data 58
4.3.8 Setting the Display Format 59
4.3.9 Setting the Averaging Function 60
4.3.10 Setting the Interpolation (dot-line) 63
4.3.11 Setting the Waveform Evaluation 64
4.3.12 Setting the FFT Analysis Mode 65
4.3.13 Setting the Analysis Channel 66
4.3.14 Setting the X-axis and Y-axis Displays 67