Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 218 / 264

198
────────────────────────────────────────────────────
11.2 FTP Service
────────────────────────────────────────────────────
Restrictions
The following restrictions apply when using the FTP service.
Files cannot be accessed during measurement.
The service must be partially terminated to access files during measurement.
If necessary, perform one of the following:
Wait until measurement is finished.
Stop measurement using the 9333 remote control.
Use the pre-software for starting and stopping measurement on this
instrument planned to be provided on the HIOKI Web site.
Use the following FTP SITE commands.
SITE START: Starts measurement
SITE STOP: Stops measurement
SITE ABORT: Aborts the current action
SITE STAT: Returns the status
(During measurement, returns "211 START", and when stopped, returns
"211 STOP".)
Further, you require an FTP client that can send recognized commands
directly to the server when using SITE commands.
For example, when using the command line FTP client from the Windows
command prompt, use the "literal" command to send a "SITE" command,
such as "FTP>literal SITE START".
Generally, only one connection is allowed at any one time.
Therefore, please avoid using high-speed download tools that use multiple
connections.
Because FTP does not define the format in which file information is to be
exchanged, depending on the FTP client you are using, you may not be
able to display file information properly.
Only commonly used FTP commands are supported.
Therefore, if you are using an FTP client that uses commands that are not
supported, you may not be able to use them.