Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 221 / 264

201
────────────────────────────────────────────────────
11.3 PPP connection
────────────────────────────────────────────────────
Inbound settings
Set when the recorder is dialed from the PC.
"Inbound" receipt permission
Sets whether the recorder is able to receive data from an external source.
"Inbound" user name and password
Sets a user name and password used for authentication when receiving
data.
Passwords are displayed as "********".
"Inbound "DNS specification and IP addresses
When using the DNS connection point, select this setting and set the IP
address for DNS. If you want the IP address to be automatically acquired
upon connection, set Automatic Acquisition as the Priority Setting.
"Inbound" data collection server
Specifies the PC on which the 9333 data collection server is operating.
Connection point: Specifies the device for connection.
IP Address: Specifies the server using IP.
Host Name: Specifies the server using a host name (DNS is required).
When IP Address is selected, an IP address is set in the next column
below. When Host Name is selected, a host name is set in the next
column below.
Other settings
Settings common to both inbound and outbound settings can be made.
FTP, User Name, Password, Access Control
Sets FTP. For details, see section 11.2.
Port Number, Delimiter, Header
Sets the delimiter/header that is used when a port number or
communications command is used by the device. For details, see section
11.1.
AT Commands
AT commands can be specified as an option on the modem.
For example, when using a cellular phone, a command that specifies data
communications may be required. (For command details, refer to the
instructions for the modem you are using.)
Disconnect Timeout
If no communications are performed, the connection is cut once the
specified time has elapsed.
Using PPP
Connect the external modem to the RS-232C card, and select ON to use
PPP.