Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 212 / 264

192
────────────────────────────────────────────────────
11.1 INTERFACE Screen (LAN Interface)
────────────────────────────────────────────────────
DHCP : Yes/No
Host Name and Address setting
Host Name (Up to 12 characters) : ____________
IP Address : ___.___.___.___
Subnet Mask : ___.___.___.___
(When using DHCP, you do not need to enter the IP address or subnet mask.)
DNS setting
DNS : Yes/No
IP Address(If Yes) : ___.___.___.___
(When settings can be acquired from DHCP, the DHCP setting takes priority.)
Gateway setting
Gateway : Yes/No
IP Address (If Yes) : ___.___.___.___
Gateway name (If Yes) : _______________________
(When using DNS, only specification of the name is necessary; when not using
DNS, the IP address must be specified.)
TPC/IP Port Number : __x (Default: 880x)
Specify the first 3 digits of the number. The last digit ranges from 0 to 9,
reserving the ports for use by the unit.
Specifications in case 880x is unavailable
You may ask your network administrator for help when building a new
network composed of a PC and a recorder only; however, in some cases
there may be no network administrator, or the network administrator may
leave settings up to you. When building a local network that is isolated, we
recommended using the following addresses.
IP Address of the PC : 192.168.0.1
IP address of the first recorder : 192.168.0.2
IP address of the second recorder : 192.168.0.3
IP address of the third recorder : 192.168.0.4
Host Name : Anything (However, each should be unique)
Subnet Mask
: 255.255.255.0
Gateway : OFF
DNS : OFF
DHCP : OFF
TCP/IP Port Number : 880x