Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 224 / 264

APPENDIX 2
────────────────────────────────────────────────────
Appendix 1 Error Messages
────────────────────────────────────────────────────
WARNING 013: Disk full. The media is running low on storage space. Cannot save.
Delete files or use a new media.
WARNING 014: File is read only. This is a read-only file. Save or delete is not possible.
WARNING 015: General failure.
File cannot be accessed because of unsuccessful formatting
or save.
WARNING 016: File already exists. Change the file name.
WARNING 017: Directory already
exists.
Change the directory name.
WARNING 018: Directory full. There are restrictions to the files and directories created in
the root directory.
WARNING 020: Path name error. Set to a maximum of 127 characters.
WARNING 021: Internal error. Internal error occurred. Check the media.
WARNING 022: Can't save without
waveform.
Capture waveform data.
WARNING 023: Conditions for
OVERWRITE are not satisfied.
Align the file functions and time axis range with the
instruments measurement data.
WARNING 030: AUTORANGE_FAULT Check the input signal.
WARNING 031: AB cursor positions
invalid.
Cursors A and B overlap. Check the cursor positions.
WARNING 032: Zero Adjustment is
necessary.
Perform zero adjust.
WARNING 034: Invalid. (OVER LAY) Not possible because superimpose is not active.
WARNING 036: No comparison AREA. Set the trigger.
WARNING 037: Up to 1000 event
markers are available.
Up to 1000 event markers are available.
WARNING 048: The recorder time axis
range has been changed.
There are restrictions for pairing the memory and recorder
time axes when using REC&MEM.
WARNING 049: The memory time axis
range has been changed.
There are restrictions for pairing the memory and recorder
time axes when using REC&MEM.
WARNING 050: Cannot use. (Roll
Mode)
Cannot use roll mode when superimpose is active.
WARNING 051: Cannot use. (Roll
Mode, Pre Trigger)
Cannot use roll mode or pre-trigger functions when using
external sampling.
WARNING 052: Cannot use.(Roll
Mode, Memory Division)
Cannot use roll mode or memory segmentation functions
when using averaging.
WARNING 054: Cannot use.
(Averaging, Overlay)
Cannot use averaging or superimpose function when roll
mode is active.
WARNING 056: Cannot use. (Realtime
Print)
Recording length cannot be continuous when the recorder
time axis is set between 10 ms and 200 ms.
WARNING 057: Cannot set. (External
sampling)
Cannot use roll mode when using external sampling.
WARNING 058: Cannot use.
(Averaging)
Cannot use the averaging function when using the memory
segmentation.
WARNING 060: No waveform data. Capture waveform data.
WARNING 061: Cannot use roll mode,
averaging, or memory split functions.
When waveform calculation is enabled, roll mode, averaging,
and memory split functions cannot be used.
WARNING 062: The memory recording
length is too short.
More data than FFT points is required when using the FFT
function.Capture a waveform that has more data than the
number of FFT points.
WARNING 063: Trigger priority is not
available.
When averaging is enabled, trigger priority cannot be set.