Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 11 / 264

iii
────────────────────────────────────────────────────
Inspection
────────────────────────────────────────────────────
NOTE
220H PAPER WINDER
*
9303 PT
9318 CONVERSION CABLE (for the 9270 to 9272, 9277 to 9279)
3273 CLAMP ON PROBE (DC to 50 MHz)
3273-50 CLAMP ON PROBE (DC to 50 MHz)
3274 CLAMP ON PROBE (DC to 10 MHz)
3275 CLAMP ON PROBE (DC to 2 MHz)
3276 CLAMP ON PROBE (DC to 100 MHz)
9018-10 CLAMP ON PROBE (10 to 500 A, 40 Hz to 3 kHz)
*
9132-10 CLAMP ON PROBE (20 to 1000 A, 40 Hz to 1 kHz)
*
9270 CLAMP ON SENSOR (20 A, 5 Hz to 50 kHz)
*
9271 CLAMP ON SENSOR (200 A, 5 Hz to 50 kHz)
*
9272 CLAMP ON SENSOR (20/200 A, 5 Hz to 10 kHz)
9277 UNIVERSAL CLAMP ON CT (20 A, DC to 100 kHz)
9278 UNIVERSAL CLAMP ON CT (200 A, DC to 100 kHz)
*
9279 UNIVERSAL CLAMP ON CT (500 A, DC to 20 kHz)
*
9555 SENSOR UNIT (used with the 9270 to 9272, and the 9277 to 9279)
9667 FLEXIBLE CLAMP ON SENSOR
(500 to 5000 A/50 to 500 A, 10 to 20 kHz)
9333 LAN COMMUNICATOR
9335 WAVE PROCESSOR
9549 FUNCTION UP DISK (power monitor function)
*: no CE marking
To connect the 9270 to 9272 or 9277 to 9279 Clamp-On Sensor to the 8951
VOLTAGE/CURRENT UNIT, use the 9318 CONVERSION CABLE. To
connect these sensors to other instruments, use in combination with the 9555
SENSOR UNIT.