Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 154 / 264

134
────────────────────────────────────────────────────
Chapter 6 Memory Segmentation Function
────────────────────────────────────────────────────
Function
display Meaning
: Increases the number splits
: Decreases the number splits
Function
display Meaning
: Increases in number (+10)
: Increases in number (+1)
: Decreases in number (-1)
: Decreases in number (-10)
Function
display Meaning
: Increases in number (+10)
: Increases in number (+1)
: Decreases in number (-1)
: Decreases in number (-10)
(3) Set the number of segmentation.
1. Move the flashing cursor to the
Division
item.
2. Use the function keys or
JOG
to set the number
of splits. See item (2) of this section for details
about the number of splits that can be set.
(4) Start/end block setting
Set the beginning and end blocks when you use
blocks from a memory that is split sequentially.
It only uses the block when the beginning and
ending blocks are set in the same block.
1. Move the flashing cursor to the
Start Block
or
End Block
item.
2. Use the
JOG/SHUTTLE
control or the function
keys to make the selection.
(5) Display block setting
Set the block to be displayed.
1. Move the flashing cursor to the
Use Block
item,
as shown in the figure on the left.
2. Use the
JOG
control or the function keys to
make the selection.