Hioki MEMORY HiCORDER 8855, Instruction Manual

Page: 128 / 264

108
────────────────────────────────────────────────────
5.4 Comment Function (CHANNEL)
────────────────────────────────────────────────────
5.4.2 Analog/Logic Channel Comment Entry
Flashing cursor
Flashing cursor
Function
display Meaning
: Standard printout is performed.
: Setting item is printed.
: Comment is printed.
: Both item and comment are printed.
Flashing cursor
Function
display Meaning
: Input comment.
: Clear comment.
: Cancels the settings.
: You can select from the list.
Comments of up to 40 characters can be printed or displayed with
waveforms for each channel. If "COMMENT" or "SET & COM" is
selected,
this comment will be included on the recording paper in all functions.
"SET & COM" prints the settings for each channel (voltage axis range,
magnification of voltage axis, zero position, low-pass filter, and full span
voltage range), along with comments.
For details on display, see Qick Start Manual Section 9.2.2.
Procedure
Screen: COMMENT (CHANNEL)
1. Press the
CHAN
key to display the comment
setting screen.
2. Move the flashing cursor to the position shown
in the figure on the left, and use the function
keys to select the desired channel screen.
3. Move the flashing cursor to the position shown
in the figure on the left.
Use the function keys to make the selection.
4. Move the flashing cursor to the channel to be
input and use the function keys to make the
selection.
For details on comment input, see Section 5.4.3,
and for the example of printing, see Section 10.5.