Hioki DSM-8542, Instruction Manual, Page: 96 / 140

86
Table 7.3 Setting Control Program Messages 5/13
Mnemonic Description Format
ELC Electrode data setting
d1 (SIZE/ACTL selection)
(0: ACTUAL, 1:SIZE)
d2 (Electrode inside diameter SIZE)
(0.0 ~ 999.9mm)
d3 (Electrode outside diameter SIZE)
(0.1 ~ 1199.9mm)
d4 (Sample thickness SIZE)
(0.001 ~ 30.000mm)
d5 (Random coefficient ACTUAL)
(0.01 ~ 999.99mm)
[Note] Be sure to achieve (Electrode inside
diameter < Electrode outside diameter).
Ignored if not complied with and only
settable parts are set.
Format]
ELC d1 d2 d3 d4 d5
d1: NR1 format
d2: NR2 format
d3: NR2 format
d4: NR2 format
d5: NR2 format
ELC? Query response electrode data is same as
setting. [Format]
ELC?
[Response]
d1, d2, d3, d4, d5
CNF Operation environment setting
d1 (Interlock control provided, not provided: 0 ~
1)
0: CONNECT 1: CUTOFF
d2 (Beep tone provided, not provided: 0 ~ 1)
0: OFF 1: ON
d3 (Beep tone good/no good: 0 ~ 1)
0: NO 1: GO
d4 (Click tone provided, not provided: 0 ~ 1)
0: OFF 1: ON [Format]
CNF d1, d2, d3, d4, d5
d1: NR1 format
d2: NR1 format
d3: NR1 format
d4: NR1 format
d5: NR1 format
CNF? Query response of operation environment is
same as setting. [Format]
CNF?
[Response]
d1, d2, d3, d4, d5