Hioki DSM-8542, Instruction Manual, Page: 40 / 140

30
Table 5.3 Meanings of Side Marks
Panel
Character
Side
Mark
Status
REMOTE
◄
In external remote mode
KEY LOCK
◄
In key lock mode
INTERLOCK
◄
Interlock in operation ([START] disabled)
BUF.FULL
◄
Data buffer is full
CHARGE ON
◄
“CHARGE” terminal can be used
OPEN SET
◄
Open correction already executed
MEAS COND
●
In measurement
SHIFT
►
Key shift mode (Numeric and other keys can be input)
TRIG INT
MAN
EXT
►
►
►
Internal trigger is selected
Manual trigger is selected
External trigger is selected
COMP ON
►
Comparison measurement is selected
The side mark flashes if a comparison result is NG.
V.CHK ON
►
Voltage check is executed automatically
The side mark flashes if result of voltage check is NG.
C.CHK ON
►
Contact check is executed automatically
The side mark flashes if result of contact check is NG.
NOTE 1
NOTE 1
NOTE 1
Note 1:
When a mark is flashing in case a result is NG, the mark does not go off till next
check is carried out or a decision is made.
Set the measuring conditions for the Measured Value Display screen as follows.
(a) Press the [F5] RESET key.
(b) Move the cursor to a desired setting item operating the cursor move keys ([
◄
], [
►
],
[
▲
] and [
▼
]). The selected items will be highlighted.
(c) Operate the function keys corresponding to the screen display or the numeric keys
for setting each item. Select each setting by pressing the [ENTER] key.
When canceling a setting, erase a numeric value by pressing the [BS] key and press
the [ENTER] key to return to data before the setting.
The functions keys corresponding to each setting item will be the scroll keys ([F2],
[F3]) for specified value. Condition setting keys for each function will be [F4] and
[F5].
See Table 5.4 for more information.
[Example]
To set voltage 75.5V.
(a) Press the [F5] PSET key.
(b) Move the cursor to “MES. V” operating the [
◄
], [
►
], [
▲
] and [
▼
] keys.
(c) Voltage cannot be specified operating the [F2] DOWN and [F3] UP keys. Input
voltage by keying the numeric keys.
(d) Set by sequentially keying the [MONI] “7”, [ELEC] “5”, [LCDOF] “.”, [ELEC] “5” and
[ENTER] keys.