Hioki DSM-8542, Instruction Manual, Page: 101 / 140

91
Table 7.3 Setting Control Program Messages 10/13
Mnemonic Description Format
SRT Function to interact with measuring voltage ON
or measurement start [START] key. [Format]
SRT
STP Function to interact with measuring stop
(measuring voltage OFF) [STOP] key. [Format]
STP
MTG Generates manual trigger.
Enabled when trigger mode is manual.
[Format]
MTG
VCK? Executes voltage check once and returns result
of it as a response.
d1 (CH1 result: 0 ~ 1)
d2 (CH2 result: 0 ~ 1)
d3 (CH3 result: 0 ~ 1)
d4 (CH4 result: 0 ~ 1)
0: NO 1: GO [Format]
VCK?
[Response]
d1, d2, d3, d4
d1: NR1 format
d2: NR1 format
d3: NR1 format
d4: NR1 format
CCK? Executes contact check once and returns result
of it as a response.
d1 (CH1 result: 0 ~ 1)
d2 (CH2 result: 0 ~ 1)
d3 (CH3 result: 0 ~ 1)
d4 (CH4 result: 0 ~ 1)
0: NO 1: GO [Format]
CCK?
[Response]
d1, d2, d3, d4
d1: NR1 format
d2: NR1 format
d3: NR1 format
d4: NR1 format
OST? Executes open correction once and capacity
value measured during open correction is
returned as a response.
In case of error, “999.9” is returned.
d1 (CH1 jig capacity: 0 ~ 99.9)
When in error: 999.9
d2 (CH2 jig capacity: 0 ~ 99.9)
When in error: 999.9
d3 (CH3 jig capacity: 0 ~ 99.9)
When in error: 999.9
d4 (CH4 jig capacity: 0 ~ 99.9)
When in error: 999.9
[Note] Be sure to carry out open correction
once before performing a contact check. [Format]
OST?
[Response]
d1, d2, d3, d4
d1: NR1 format
d2: NR1 format
d3: NR1 format
d4: NR1 format