Hioki DSM-8542, Instruction Manual, Page: 28 / 140

18
MO NI COMP
4
EL EC
5
7 8
DA TA
SE TU P
6
9
SH IF T
L OC A L
E
M OD
1
O PE N
2
V.CHK
3
C. CH K
BS
P RO G
L CDOF
.
０
LO C K
MA N. T E N T E R
-
[PROG]/“1”: Program
The key to move to the sequence program creation screen.
See “Operating Program Creation Screen.”
When in the Numeric Input mode, the key will become an input key (“1”).
[OPEN]/“2”: Open correction
The key to move to the screen to set reference values for contact checks.
See “Operating Open Setting Screen.”
When in the Numeric Input mode, the key will become an input key (“2”).
[V. CHK]/“3”: Voltage check
The key to execute once a voltage check of measuring voltage output between
“OUTPUT” and “GUARD.”
When in the Numeric Input mode, the key will become an input key (“3”).
[C. CHK]/“BS”: Contact check
The key to execute once a contact check.
When in the Numeric Input mode, the key will become a “BS” key to delete
characters that are input.
[ ∆ MOD]/“4”: Deviation Measuring mode
The key to move to the Deviation Value Display and Setting screen.
See “Operating Deviation Value Display and Setting Screen.”
When in the Numeric Input mode, the key will become an input key (“4”).
[ELEC]/“5”: Electrode
The key to move to the Electrode Parameter Setting screen.
See “Operating Electrode Setting Screen.”
When in the Numeric Input mode, the key will become an input key (“5”).
[SETUP]/“6”: Set up
The key to move to the Operation Environment Setting screen.
See “Operating Operation Environment Setting Screen.”
When in the Numeric Input mode, the key will become an input key (“6”).
[LOCAL]/“E”: Local
The key to cancel the Remote mode.
When in the Numeric Input mode, the key will become an exponent display and
input key (“E”).