Hioki DSM-8542, Instruction Manual, Page: 100 / 140

90
Table 7.3 Setting Control Program Messages 9/13
Mnemonic Description Format
PWA Setting Measuring Voltage System A
d1 (Voltage: 0.1 ~ 1000.0V) [Format]
PWA d1
d1: NR2 format
PWA?
Query response of Measuring Voltage System A
is same as setting. [Format]
PWA?
[Response]
d1
PWB Setting Measuring Voltage System A
d1 (Voltage: 0.1 ~ 1000.0V) [Format]
PWB d1
d1: NR2 format
PWB? Query response of Measuring Voltage System A
is same as setting. [Format]
PWB?
[Response]
d1
THL Histogram display threshold setting
d1 (Applicable channels: 1 ~ 15)
d2 ~ d10: threshold: 1 ~ 9
[Notes]
1. Applicable channels are numerics 1 ~ 15
assigning four channels to four bits.
Bit3 bit2 bit1 bit0
CH4 CH3 CH2 CH1
2. d1 to d9 are automatically sorted and can be
set sequence free. d1 > d2 is observed
relative to the screen.
3. Set “0s” where no settings are to be made
such as when setting of d1 to d9 entirely is not
required.
Example: “THL 1E12, 5E11, 1E11, 5E10, 0, 0, 0,
0, 0”
[Format]
THL d1, 2d, d3, d4, d5,
d6, d7, d8, d9, d10
d1 ~ d9: NR3 format
THL? Query response of threshold is same as setting. Format]
THL?
[Response]
d1, 2d, d3, d4, d5,
d6, d7, d8, d9, d10