Hioki DSM-8542, Instruction Manual, Page: 63 / 140

53
(2) Setting Deviation Display mode
Select an item by operating the [
▲
] and [
▼
] keys. Select a setting mode
operating the [
◄
] and [
►
] keys. The selected mode will be highlighted.
The modes have the following meanings.
OFF: Deviation is not displayed.
DEV: Displays (measured value - reference value).
PAR: Displays (measured value - reference value) x 100/reference value (%).
(3) Reference value setting
Select “CH1 REF” “CH2 REF” “CH3 REF” “CH4 REF” by operating the [
▲
] and
[
▼
] keys and input a reference value to be set by keying the numeric input keys.
“REF” is a reference value of a standard deviation. Press the [ENTER] key to
set the input reference value.
(4) End setting
Press the [ENTER] key to finish setting and to return to the measurement
screen.
[Notice]
Deviation is displayed only on the screen and normal measured values are
output to the interface.
5.3.4 Creating histogram
This function is enabled in manual trigger, external trigger and sequential measurement.
This function cannot be used in the Internal Trigger mode.
(1) Press the [DATA] (MEASURED RESULT DATA) key.
Pressing the key changes the screen to the screen to select a function for
totaling (histogram data counter, measured data buffer). (See Fig. 5.21)
This screen is for condition setting for histogram creation, data buffer display
and data buffer clear.
Select an item to be executed by operating the function key. Selecting an item
changes the screen to the execution screen.
［ １ ］ ４ ． ０ ６ ２ ４ Ｅ ＋ １ ５
Ｒ Ｖ
Ｒ ： Ｈ Ｌ Ｄ ７ Ｐ Ｏ Ｗ Ａ
［ ２ ］ ６ ． ７ ２ ５ ３ Ｅ ＋ １ ６
Ｒ Ｖ
Ｒ ： Ｈ Ｌ Ｄ ７ Ｐ Ｏ Ｗ Ａ
［ ３ ］ １ ． ０ ７ ７ ５ Ｅ ＋ １ ６
Ｒ Ｖ
Ｒ ： Ｈ Ｌ Ｄ ７ Ｐ Ｏ Ｗ Ｂ
［ ４ ］ ６ ． ６ １ ０ ７ Ｅ ＋ １ ６
Ｒ Ｖ
Ｒ ： Ｈ Ｌ Ｄ ７ Ｐ Ｏ Ｗ Ｂ
Ｐ Ｏ Ｗ Ａ ： １ ０ ０ ． ０ Ｖ Ｓ Ａ Ｍ Ｐ Ｌ ： １ ５ Ｐ Ｌ Ｃ
Ｐ Ｏ Ｗ Ｂ ： １ ０ ． ０ Ｖ Ｄ Ｅ Ｌ Ａ Ｙ ： ０ ｍ ｓ
Ｓ Ｅ Ｑ ： Ｏ Ｎ ： ０ Ａ Ｖ Ｅ ： Ｏ Ｆ Ｆ
Ｈ Ｉ Ｓ Ｔ Ｓ Ｅ Ｔ Ｈ Ｃ Ｌ Ｒ Ｈ Ｃ Ｌ Ｒ Ｄ Ｒ Ｏ Ｌ Ｌ
[Regular Measurement Screen]
Fig. 5.21 Function Selection Screen
Press the [ENTER] key on this Function Select screen to return to the
Measurement screen.