Hioki DSM-8542, Instruction Manual, Page: 57 / 140

47
5.2.15 Setting high-speed measuring mode ([SETUP], FAST)
(1) Press the [F4] FAST (FAST) key on the Operating Environment Setting screen.
The screen will change to the Current Limit Value Setting screen for high-speed
measurement. (See Fig. 5.16) This screen is contained in the Current Limit
Value Setting screen of the measuring voltage source.
Ｆ Ａ Ｓ Ｔ Ｍ Ｅ Ａ Ｓ Ｕ Ｒ Ｅ
Ｄ Ｉ Ｓ Ｐ Ｌ Ａ Ｙ ： Ｏ Ｆ Ｆ ／ Ｏ Ｎ
Ｂ Ｕ Ｆ Ｆ Ｅ Ｒ Ｉ Ｎ Ｇ ： Ｏ Ｆ Ｆ ／ Ｏ Ｎ
Ｈ Ｉ Ｓ Ｔ Ｃ Ｏ Ｕ Ｎ Ｔ ： Ｏ Ｆ Ｆ ／ Ｏ Ｎ
Ｒ Ａ Ｎ Ｇ Ｅ Ｃ Ｈ Ｋ ： Ｏ Ｆ Ｆ ／ Ｏ Ｎ
Ｏ Ｎ Ｏ Ｆ Ｆ
Fig. 5.16 High-speed Measurement Setting Screen
The following items are set:
Setting for stopping screen display (Display measurement ON/OFF)
Setting for stopping data buffer recording (Recording measurement ON/OFF)
Setting for stopping histogram counting up (Counter measurement ON/OFF)
Setting for stopping measuring range check (Confirmation measurement
ON/OFF)
Select a set item by operating the [
▲
], [
▼
], [
◄
] and [
►
] keys.
Select “ON/OFF” by operating the [
◄
] and [
►
] keys such as [F4] ON and [F5]
OFF.
The selected item will be highlighted on the screen.
Press the [ENTER] key to return to the Measurement screen after completing
setting.
5.2.16 Setting interface conditions
The following items are set.
Interlock
function setting
Beep tone setting
Key click tone setting
GP-IB address setting
RS-232C baud rate setting
RS-232C character length setting
RS-232C parity check setting
RS-232C stop bid length setting
(1) External interface condition setting
Press the [F1] (CONFIGURATION) key on the Operating Environment Setting
screen (see Fig. 5.11).
The screen changes to the External Interface Condition Setting screen. (See
Figs. 5.17 and 5.18)