Hioki DSM-8542, Instruction Manual, Page: 50 / 140

40
(1) Press the [PROG] key on the Measurement screen.
The following Sequence Program Creation screen will be displayed.
Ｍ Ａ Ｋ Ｅ Ｓ Ｅ Ｑ Ｕ Ｅ Ｎ Ｃ Ｅ Ｐ Ｒ Ｏ Ｇ Ｒ Ａ Ｍ
Ｐ Ｒ Ｏ Ｇ Ｒ Ａ Ｍ Ｎ ｏ ． ： ［ ０ ］
Ｄ Ｉ Ｓ Ｃ Ｈ Ｇ １ ： ［ ０ ． ０ ］ Ｓ Ｅ Ｃ
Ｃ Ｈ Ａ Ｒ Ｇ Ｅ ： ［ ０ ． ０ ］ Ｓ Ｅ Ｃ
Ｍ Ｅ Ａ Ｓ Ｔ Ｉ Ｍ Ｅ ： ［ ０ ． １ ］ Ｓ Ｅ Ｃ
Ｄ Ｉ Ｓ Ｃ Ｈ Ｇ ２ ： ［ ０ ． ０ ］ Ｓ Ｅ Ｃ
Ｄ Ｏ Ｗ Ｎ Ｕ Ｐ
Fig. 5.8 Sequence Program Creation Screen
The Function keys [F2] and [F3] will respectively change to the DOWN and UP functions.
A preset value can be chosen keying the DOWN and UP keys in addition to directly
inputting it through the numeric input keys.
After finishing setting, return to the Measurement screen by pressing the [ENTER] key.
(2) Program No. setting
Input in “PROGRAM NO.” a program No. for a program to be created.
Ten types of sequence programs, 0 to 9, can be created.
(3) Charging time, measuring time and discharging time setting
In sequence program measurement, the operational sequence of DISCHG1 --
CHARG -- MEAS TIME -- DISCHG2 cannot be changed.
(a) Setting discharging time before measurement (DISCHG1)
Set a time to discharge the sample before starting measurement.
0 to 999.9s can be set.
(b) Setting charging time before measurement (CHARGE)
Set a time to charge the sample by impressing measuring voltage.
0 to 999.9s can be set.
(c) Setting measuring time (MEAS TIME)
Set a time to measure a sample.
0 to 999.9s can be set.
(d) Setting discharging time after measurement (DISCHG2)
Set a time to discharge the sample after measurement.
0 to 999.9s can be set.