Hioki DSM-8542, Instruction Manual, Page: 11 / 140

1
1. Preparations Before Operation
1.1 Ch
eck
during Uncrating
This product has been inspected carefully at the HIOKI factory in preshipment inspection.
Nevertheless, check the following items when uncrating the crate.
1) Any damage on the exteriors of the product.
2) Quantities of accessories
Check in accordance with Table 1.1 List of Accessories.
Table 1.1 List of Accessories
Item Quantity Remarks
Power cable 1 Power cable with three poles and grounding pin
3P-2P
conversion adapter
1 Changes the 3P plug of the power cable to a 2P plug
Operational manual 1 This manual
If any damage or missing accessory is found, please contact our distributor or sales
office near your location.
1.2 Operating Power Supply
This meter is powered by the following power supply.
Power supply voltage 100V ±10%
Change in power supply voltage Factory option other than 100V (115, 220 or 240V)
Dedicated power supply unit PSU8541 is rated to
100V only
Power supply frequency 50/60Hz
[Warning]
Before connecting the power plug, check that the AC power supply voltage to be used
matches the voltage specified on the rear panel.
If they do not match, a fire or damage to the meter may result.
[Caution]
Use a 3-conductor power cable conforming to the power supply voltage. A 100V
power cable is supplied with the meter as an accessory. Do not use this accessory
cable with other electric equipment.