Hioki DSM-8542, Instruction Manual, Page: 93 / 140

83
Table 7.3 Setting Control Program Messages 2/13
Mnemonic Description Format
CCH Current·CH setting Format]
CCH d1
d1: NR1 format
CCH
？
Query response of current·CH is same as
setting. [Format]
CCH?
[Response]
d1
FSM High-speed measuring mode setting
d1 (Measured value display: 0 ~ 1)
0: OFF
1: ON
d2 (Measured data buffer: 0 ~ 1)
0: None
1: Data found
d1 (Histogram counter reset: 0 ~ 1)
0: None
1: Data found
d1 (Range control: 0 ~ 1)
0: None
1: Data found
[Format]
FMS d1, d2, d3, d4
d1: NR1 format
d2: NR1 format
d3: NR1 format
d4: NR1 format
FSM? Query response of trigger delay time is same as
setting. [Format]
FSM?
[Response]
d1, d2, d3, d4
SPL Integral time setting (Unit, set values)
d1 (Unit: 0 ~ 1)
0: PLC
1: ms
d2 (Set value)
PLC: 1 ~ 15
ms: 2 ~ 300 [Format]
SPL d1, d2
d1: NR1 format
d2: NR1 format
SPL? Query response on setting number of integral
time (unit, set value) is same as setting. [Format]
SPL?
[Response]
d1, d2
DLY Trigger delay time (ms) setting
d1 (Time: 0 ~ 9999) [Format]
DLY d1
d1: NR1 format
DLY? Query response on trigger delay time is same as
setting. [Format]
DLY?
[Response]
d1