Hioki DSM-8542, Instruction Manual, Page: 42 / 140

32
Measuring conditions are set on the Measured Value Display screen after pressing the
[F5] PSET key. To facilitate settings and to enable selection of a value operating the
function keys [F2] to [F5], a specified value is given to each condition.
To reset after finishing setting, press the [ENTER] key.
(2) Setting screen
As shown in Fig. 5.1, the setting screen is displayed by moving from the
Measured Value Display screen to the Setting screen in accordance with a
measuring condition or other items.
The Setting screen has a dedicated screen for each set item.
To reset to the Measured Value Display screen, press the [ENTER] key.
Measured Value Display screen Setting screen
Regular
measurement
screen
Change by
pressing
the [MONI]
key
Sequential
Measurement
Monitoring screen
Reset by pressing the
[ENTER] key
Move to the setting
screen operating setting
and function keys.
Cannot measure on this
screen
Fig. 5.6 Key Operation and Screen Change
See Table 5.5 for information on the setting key to move to the Setting screen and on the
function keys.