Hioki DSM-8542, Instruction Manual, Page: 22 / 140

12
4 Names and Functions of Components
[Notice]
In the following descriptions, characters enclosed by “[ ]” such as [ENTER] are
the characters printed on key tops. Characters enclosed by “ ” such as
“POWER” are the characters printed on the panels.
4.1
Safety Alert Symbols
The following safety alert symbols are placed on the front and rear panels of this meter.
！
Warning
symbol This symbol is marked where the operational manual
needs to be referred to.
Electrical
This symbol indicates high voltage hazard and is
indicated on terminals where high voltage is output
such as measuring terminals.
Grounding
terminal
Indicated on the grounding terminal “GND” on the rear
of the meter. If the grounding pin of the power cable
cannot be grounded, be certain to ground this terminal.
The locations where the safety alert symbols are placed are illustrated below.