Hioki DSM-8542, Instruction Manual, Page: 126 / 140

116
(2) Output signals
OUTCOM:
The common terminal for output signals.
Isolated from the common terminal for input signals.
/V.CHECK GO: Output for “acceptable/non-acceptable” decision in voltage check.
(A)(B)
Output becomes active when decision is “acceptable.”
/C.CHECK GO: Output for “acceptable/non-acceptable” decision in contact check.
(1)~(4)
Output becomes active when decision is “acceptable.”
/OPEN GO:
Output for “acceptable/non-acceptable” decision in open
correction.
(1)~(4) Output becomes active when decision is “acceptable.”
/COMP GO:
Output for “acceptable/non-acceptable” decision in comparison
measurement.
(1)~(4) Output becomes active when decision is “acceptable” as
measurement result.
/EOM:
Output signal to indicate that measured data can be output.
Fetch output data on the timing this signal becomes LOW level.
/INDEX:
Output signal to indicate that a sample can be changed.
Change the sample on the timing this signal becomes LOW level.
/SRT.E:
Signal indicating that the meter can be started (voltage can be
output).
Becomes HIGH level in a start disable state by the interlock
function, becoming LOW level when starting is ready.
/VON:
Signal to indicate measuring voltage is being output.
/ERROR:
Output signal indicating a trouble has occurred with the meter.