78
_____________________________________________________________________________________________
5.4 Commands Specific to the 3532-50, 3522-50
_____________________________________________________________________________________________
:TRIGger:DELAy
Sets the trigger delay time.
:TRIGger:DELAy?
Queries the trigger delay time.
Syntax
:TRIGger:DELAy
<data>
<data>
Numerical data in NR2 format from 0.00 to 9.99.
Function
Sets the trigger delay time.
The numerical value can be in NRf format, but rounding is performed for figures
beyond the last valid decimal place.
Example
Transmission
:TRIGger:DELAy 0.05
The trigger delay time is set to 50 ms.
Error
If <data> is other than numerical value described above, an execution error
occurs.
Executing this command while the open or short circuit compensation is
performed generates an execution error.
Syntax
:TRIGger:DELAy?
Function
Returns the current setting of trigger delay time as a numerical value in NR2
format from 0.00 to 9.99.
Example
Response
If headers are on
:TRIGGER:DELAY 0.05
If headers are off
0.05
The trigger delay time has been set to 50 ms.
Error
If the response message is longer than 300 bytes, a query error is generated.
