68
_____________________________________________________________________________________________
5.4 Commands Specific to the 3532-50, 3522-50
_____________________________________________________________________________________________
:PARameter1
(2, 3, or 4)
:DIGit
Sets the number of displayed digits for the test parameters.
:PARameter1
(2, 3, or 4)
:DIGit?
Queries the number of displayed digits for the test parameters.
Syntax
:PARameter
1 (2, 3, or 4)
:DIGit
<data>
<data>
Numerical data in NR1 format
3 to 5
Function
Sets the number of displayed digits for the first to fourth parameters.
Example
Transmission
:PARameter1:DIGit 4
The number of displayed digits for the first parameter is set to 4.
Note
The response message for the ":MEASure?" query is always returned in 5 digits.
Error
If <data> is other than numerical value described above, an execution error
occurs.
Executing this command while the open or short circuit compensation is
performed generates an execution error.
Syntax
:PARameter
1 (2, 3, or 4)
:DIGit?
Function
Returns the number of displayed digits for the first to fourth parameters as
numerical data in NR1 format
Example
Response
If headers are on
:PARAMETER1:DIGIT 4
If headers are off
4
The number of displayed digits for the first parameter has been set to 4.
Error
If the response message is longer than 300 bytes, a query error occurs.
