63
_____________________________________________________________________________________________
5.4 Commands Specific to the 3532-50, 3522-50
_____________________________________________________________________________________________
:MEASure?
Queries measured data items.
Syntax
:MEASure?
Function
Returns the measured values of test data items as numerical values in NR2 and
NR3 format.
1. During normal testing
Returns the measured value of the parameter that bits of MR0 (measurement
register 0) and MR1 (measurement register 1) have been set to 1 in the following
order; impedance (Z), admittance (Y), phase angle (PHASE), series capacitance
(CS), parallel capacitance (CP), loss coefficient (D), series inductance (LS),
parallel inductance (LP), Q factor (Q), series resistance (RS), conductance (G),
parallel resistance (RP), reactance (X), and susceptance (B).
When powering on, the test parameters are initially set to impedance (Z) and
phase angle (
θ
).
The contents of MR0 and MR1 are set with the :MEASure:ITEM command.
2. During comparator testing
Returns the measured values of the first and second parameters which have been
set and the comparator result.
The result of the comparison is as follows.
Within limits or logical product limits 0
Above the upper limit or out of logical product limits 1
Below the lower limit -1
The data is returned as shown below.
<logical product of comparison result>, <test value of the first parameter>,
<comparison result of first parameter>, <test value of second parameter>,
<comparison result of second parameter>
Sets the first parameter with the ":PARameter1" command, and sets the second
parameter with the ":PARameter3" command. When the parameter is set to OFF,
the data is not returned.
3. During scaling testing
The data is returned as shown below.
<test value of the first parameter>, <test value of second parameter>
Sets the first parameter with the ":PARameter1" command, and sets the second
parameter with the ":PARameter3" command. When the parameter is set to OFF,
the data is not returned.
